12

63-A001 LIFTING EYE

Thanks to the standard size profiles of our UPRACKS roof racks, the lifting eyes can be slid into all the …

2

63-A002 and 63-A00202 ANCHOR PLATE/RECTANGULAR-SQUARE NUT

63-A002 ANCHOR PLATE/RECTANGULAR NUT – 40 mm 63-A00202 ANCHOR PLATE/SQUARE NUT – 20 mm, STANDARD By a simple sliding mechanism …

3

63-A003 PORTABLE TELESCOPIC LADDER

In our opinion, the best solution to climb onto the vehicle’s roof is to use a ladder that rests on …

4

63-A004 WHEEL CARRIER

Simple and easy to use, it has been designed such that it doesn’t need to be permanently attached to the …

5

63-A005 ADJUSTABLE SINGLE JERRY CAN HOLDER

This jerry can holder allows positioning a single jerry can onto the roof rack. It can be fitted both longitudinally …

63-A006-Aggancio_gomma_piccolo

63-A0066 UNIVERSAL RUBBER/LEVER CLAMP KIT

The kit consists of a pair of zinc-coated supports that can be fitted by the rectangular nut in any position …

7

63-A007 LIFT JACK HOLDER

A simple and extremely resistant system for attaching Hi-Lift jack to UPRACKS roof rack in the safest and fastest way. …

9

63-A009 UNIVERSAL IRON WIND FAIRING

It has been designed to stop wind noise and reduce fuel consumption. This fairing can be fitted to UPRACK roof …

10

63-A010 LIGHT/ AERIAL MOUNT BRACKET

The kit consists of a pair of supports that can be attached to any point of the perimeter frame of …

45

63-AC45 ALUMINIUM BOX

Exclusively designed for UPRACKS, this aluminium box has some important characteristics: metal sheet thickness: 1.2 mm; cover rubber gasket and …

11

63-A011 AWNING KIT / LONG SUPPORT

The kit consists of a pair of supports to be attached to the perimeter frame of UPRACKS roof rack. It …

14

63-A014 PLATE HOLDER

It consists of a pair of supports to be attached to the roof rack frame by 5 rectangular nuts and …

15

63-A015 MAGNET FOR ANCHOR PLATE/RECTANGULAR NUT

This simple micro-magnet allows easy removal of the rectangular nut from channels (slots) of UPRACKS roof rack.

16

63-A016 THIN RUBBER STRIP TO AVOID WIND NOISE (sold by meter)

Especially designed and manufactured for UPRACKS, this PVC strip is provided as three standard pieces of 160 cm length and …

17

63-A017 ANTI-SLIP WIDE RUBBER STRIP (sold by meter)

Especially and exclusively designed and manufactured for UPRACKS, this pebble-like PVC strip is provided by meter and mainly serves to …

19

63-A019 UPRACKS UTILITY/CAMP TABLE

Designed to bear more than 80 Kg weight, the table is fully made of aluminium having a honeycomb structure. The …

IMG_0851_kit_fissaggio_tavolino_Upracks

63-A018 UPRACKS TABLE MOUNT KIT (optional)

The set consists of two L-shaped supports to be attached to the lower part of the roof rack. In this …

87

63-A08787 ALUMINIUM ANGLE PIECE (PAIR)

63-A08787    ALUMINIUM ANGLE PIECE (PAIR) Pair of melt aluminium angle pieces to provide a firm load stabilization; they can also …

36rullo

63-AROL ROLLER

Roller to facilitate loading accessories onto the roof rack. Size: 680 mm. Available in different lengths (upon request).

supporto-ad-S-piccolo

63-ASRFITS2 SUPPORT / CONNECTOR

“S” shaped supports with bolts and inserts as required for attachment of the top rail onto roof-rack. It is mainly …

piccola

63-A023 – WALKABLE PLATFORM

If you wish to create a robust and resistant walkable platform that partially or fully occupies the surface of your …

63-A0111-piccola

63-A0111 AWNING KIT / SUPPORT

This new awning bracket is designed in two pieces to permit to fit the side awning outside or inside the …

63-WT50S-piccola

63-WT50S WATER TANK – 50 LITRES – SLIM

Simple slim water tank with a new design 1230 mm long, 600 mm width and only 82 mm height. Capacity …

63-WT50SFK-water-tank-and-fitting-kit-piccola

63-WT50SFK WATER TANK FITTING KIT

The specific fitting kit in stainless steel for 63-WT50S.

63-ALRL_SCALA_POSTERIORE_DEFENDER-01

63-ALRL REAR LADDER FOR LAND ROVER DEFENDER

Using the same UPRACKS roof racks frames, we’ve designed a simple alloy ladder that fits on the rear left side …

63-ALRL_SCALA_POSTERIORE_DEFENDER-02

63-ALRLSET REAR LADDER FOR LAND ROVER DEFENDER WITH ESTENSION

Using, as a base, the ladder 63-ALRL, we add an extension with 3 more steps that permits, with special skids, …

63-WT20_p

63-WT20 20-LITRE JERRY CAN

Plastic jerry can for water. Capacity: 20 litres. Size: 350x170x470 mm. Weight 2.5 Kg

63-TRAX_pedane_p

63-TRAX1400 SAND TRACK

Sand track in plastic material. Extremely flexible, light and elastic. Great alternative to heavy and bulky metal tracks. Helps to …

63-ET20_1000px-p

63-ET20 STAINLESS STEEL JERRYCAN

Jerrycan made of Stainless Steel. Capacity: 20 litres.

63-AVELCRO-p

63-AVELCRO30SET VELCRO STRAP 30 mm

The velcro straps can be used as binders or as a normal belt. Have a capacity of 30 Kg respectively …